Samsung Galaxy S22 (Snapdragon) Battery

The range score is made up of three performance sub-scores: stationary, moving, and calibrated use cases. Each sub-score includes the results of a full range of tests to measure autonomy in all kinds of real-life scenarios.

A robot housed in a Faraday cage performs a series of touch-based user actions during what we call our “typical use scenario” (TUS) – making calls, streaming video, etc. – 4 hours of active use over a 16-hour period, plus 8 hours of “sleep”. The robot repeats this series of actions every day until the device is discharged.

Using a smartphone on the go puts a strain on autonomy due to further “hidden” requests, such as the continuous signaling associated with the selection of the cell phone network. SBMARK Battery experts take the phone outdoors and perform a well-defined set of activities following the same three-hour travel itinerary (walking, taking the bus, the subway …) for each device

For this series of tests, the smartphone returns to the Faraday cage and ours robots repeatedly perform actions related to a specific use case (such as games, video streaming, etc.) at a time. Starting at 80% charge, all devices are tested until they have consumed at least 5% of the battery charge.

Charging is completely part of the overall battery experience. In some situations where battery life is minimal, knowing how fast you can charge becomes a problem. The SBMARK battery charge score consists of two secondary scores, (1) Full charge and (2) Quick boost.

Full charge tests evaluate the reliability of the battery charge indicator; measure how long and how much energy it takes the battery to charge from zero to 80% capacity, 80 to 100% as shown by the user interface, and up to an actual full charge.

With the phone at different charge levels (20%, 40%, 60%, 80%), Quick boost tests measure the amount of charge the battery receives after being plugged in for 5 minutes. The graph here compares the average runtime gain from a 5 minute quick charge.

The SBMARK energy efficiency score consists of two secondary scores, Charge up and Discharge rate, which combine both data obtained during a typical use scenario based on robots, calibrated tests and charge evaluation, taking into account the battery capacity of the device . SBMARK calculates the annual energy consumption of the product, shown in the graph below, which is representative of the overall efficiency during charging and in use.

The secondary charge score is a combination of four factors: the overall efficiency of a full charge, relative to the amount of energy needed to fill the battery versus the energy the battery can provide; the efficiency of the travel adapter when it comes to transferring power from an outlet to the phone; the residual consumption when the phone is fully charged and still connected to the charger; and the residual consumption of the charger itself, when the smartphone is disconnected from it. The graph below shows the overall efficiency of a full charge in%.

The discharge secondary score evaluates the discharge rate of a battery during a test, which is independent of the battery capacity. It is the ratio of the capacity of a battery divided by its autonomy. A small capacity battery may have the same runtime as a large capacity battery, indicating that the device is well optimized, with a low discharge rate.