Tecno has just unveiled the Spark 10 Pro, a sequel to last year’s Spark 9 Pro with a better screen. The new model has a larger 6.8-inch IPS LCD with a 90Hz refresh rate, compared to the previous model’s 6.6-inch 60Hz (both have a resolution of 1080 x 2460 px, 20.5: 9). Also, for the first time on a Spark, the 10 Pro has a glass back, something usually reserved for premium units like the Phantoms.
The company calls this “tough star glass” without specifying any brand names. The “starry” part is due to the speckled look: the phone is available in Starry Black and Pearl White.
Tecno Spark 10 Pro in Pearl White and Starry Black
In addition to the display, the new Tecno Spark 10 Pro also brings a slightly updated chipset, the Helio G88 (compared to the G85, which was unable to handle 90Hz FHD+ displays). Tecno has loaded it with 8GB of RAM (plus up to 8GB of virtual RAM) and 256GB of onboard storage. The display and chipset are reminiscent of the Camon 18, though the base configuration on that only had half the memory capacity at 4/128GB. By the way, Spark has a dedicated microSD slot.
The Spark also has a better front-facing camera, a 32MP unit with a built-in flash (same as on the older Spark 9 Pro, but better than the 16MP unit on the Camon). The rear camera has a 50MP main unit with Super Night mode and 3D LUTs for quickly adjusting the style of your photos, plus an unspecified sidekick (a depth sensor, most likely).
Like its siblings, the 10 Pro has a 5,000mAh battery with 18W charging via the USB-C port using the bundled cable and adapter.
This is a 4G dual SIM phone with NFC and FM radio on board, thanks to the 3.5mm headphone jack at the bottom. There is a fingerprint reader built into the power button on the side.
The Tecno Spark 10 Pro will be available later this month, the price is still unknown. The phone will launch with Android 13 and HiOS 12.6 out of the box.
Start a new Thread