A couple of months ago OnLeaks released 3D renders of the Samsung Galaxy Xcover Pro 2. Since then, new information has emerged, including that the actual market name of the phone may be Galaxy Xcover6 Pro. Anyway, it was time to update the renders.
The overall design looks the same, but corrections have been made. For example, the two camera lenses and two of the buttons (top and left) now have red color accents, which is pretty typical of the series. These are supposed to be shortcut buttons, among other things, they allow the user to quickly activate a preset action without using the screen.
Either way, previous leaks have shown that the Xcover6 Pro will have a Snapdragon 778G chipset with 6GB of RAM. It will be paired with 128GB of storage, according to GizNext. The display will measure 6.56 “(1,080 x 2,408 px) and should run at the standard 60Hz refresh rate.
The phone is expected to have a 50MP main camera and an 8 or 12MP ultra wide camera. On the front, the selfie camera which is carved into the display should have a 13MP sensor.
The phone will be powered by a 4,050mAh battery. That battery should be removable, and as you can see, there are pogo pins on the bottom for a charging dock (which typically charges multiple phones at the same time). In terms of size, the rugged phone will be 169 x 80 x 10mm and weigh around 235 grams. Expect IP68 dust and water resistance, as well as additional ratings for protection.
There is still no indication as to when Samsung will make the Galaxy Xcover6 Pro. These models are typically aimed at professionals, but are sometimes also available for purchase by regular users.
Start a new Thread